Gold Film Hydrogen Sulfide Analyzer
The newest H2S analyzer from AMETEK Brookfield is the Jerome® J605 Hydrogen Sulfide Analyzer. The Jerome® J605 can read as low as 3ppb with an incredible resolution of 20ppt. The J605 is housed in a light and ergonomically designed case, setting a new precedent for low-level, portable monitors. The industry-proven, gold film sensor has been upgraded and improved from previous models, resulting in longer life expectancies.
- Ultra-Sensitive: Detect hydrogen sulfide in the air at levels as low as 3 parts per billion (3ppb).
- Proven: Jerome’s gold film sensing technology has been validated in the laboratory and in the field for more than 35 years.
- Rugged: Its sturdy metal housing makes the J605 tough enough for nearly any environment.
- Reliable: With 18 hours of battery life per charge, the J605 is always ready when you need it.
- Smart: Features onboard data logging for up to 20,000 measurements, USB data transfer, and SCADA interface capabilities through 4-20ma output.
Features and Benefits
- Ultra Low-Level Detection: The Jerome J605 can detect H2S in air at levels as low as 3 parts per billion (ppb) with a resolution of 20 parts per trillion (ppt).
- Gold Film Sensor: Validated in the field and in the lab for over 35 years, our proprietary gold film sensor ensures repeatable results across a wide range of applications.
- Versatile: With a detection range of 3 ppb to 10 ppm, the J605 is ideal for a variety of applications, including regulatory compliance and odor control at wastewater and landfill facilities, scrubber efficiency testing and monitoring corrosion in control rooms, among others.
- Regulatory Compliance: The J605 is in active use by many regulatory agencies and landfill, water treatment and waste management facilities across the world.
- Data Logging: The integrated data logging system of the J605 can store data for up to 20,000 samples, including date, time and up to 80 locations.
- Survey Mode: While in survey mode, the J605 continuously draws in samples of air to help users sweep an area for hydrogen sulfide hot spots and enable corrective action to be taken.
- Field Regeneration: The J605 boasts a battery life of 18 hours and offers battery powered sensor regeneration that can be performed wherever and whenever you need it, allowing for extended testing in the field.
- Rugged Construction: Housed in a light, ergonomically designed, durable metal casing, the J605 sets a new precedent for portable, low-level H2S monitors.
- Intuitive Interface: The J605 offers simple, menu-driven operation as well as easy-to-understand diagnostics and error detection. It does not require PC software and comes with a USB interface for easy data transfer.
Specifications
|
Detection Range:
|
3 ppb (0.003 ppm) – 10 ppm
|
|
Resolution:
|
20 ppt (0.02 ppb) *range dependent
|
|
Accuracy:
|
±1 ppb at 5 ppb
±3 ppb at 50 ppb
±0.03 ppm at 0.5 ppm
±0.3 ppm at 5.0 ppm
|
|
Response Time:
|
Survey Mode: 12-27 seconds
Manual Mode: 12-27 seconds
Auto Mode: 12-53 seconds
|
|
Flow Rate:
|
150 mL/min
|
|
Result Units:
|
ppm, ppb
|
|
Autosample Intervals:
|
1, 2, 5, 10, 15, 30, 45, 60, 90 or 120 minutes
|
|
Integrated Data Storage:
|
20,000 test results; retains date, time and up to 80 locations
|
|
Display:
|
3.5” (9 cm) backlit LCD
|
|
Battery:
|
Rechargeable NiMH
18 hour life, charges in 3 hours
|
|
Power Requirements:
|
12 VDC for the instrument;
100-240 VAC, 47-63 Hz, 1.3A for the AC power supply
|
|
Fuse:
|
Auto-resetting fuse
|
|
Operating Environment:
|
0°C to 40°C, non-condensing, non-explosive
|
|
Output:
|
Digital: USB serial data to PC, printer or USB flash drive
Analog: 4-20 mA passive current loop; accurate to 0.3% of output
|
|
Dimensions:
|
11″ L x 6″ W x 6.5″ H
(28 cm L x 16 cm W x 17 cm H)
|
|
Weight:
|
5.4 lbs. (2.5 kg)
|
|
Warranty:
|
1 year, factory parts and labor
|
|
Certifications:
|
TUV 61010, CE
|
Contact our sales team for more information on our Jerome® series.
Downloads
Jerome J605 Brochure
